CALL US

Paper Coating Machine

Paper Coating Machine/Coma Coating Machine works in terms of electrical heat source. The gravure equipped with Paper Coating Machine/Coma Coating Machine supports for coating Paper and Packaging materials. This is a suitable option to produce variety of Packaging films with Coating applied on it.

Description :

Type Of Machine Paper Coating Machine/Coma Coating Machine
Working Speed 20 To 40 Mtr/Min
Minimum Web Width 600 MM
Maximum Web Width 1350 MM
Coating System Gravure System for Silicon Coating
Winding System Center Type
Unwinding System Center Type
Impression Roll Function   Pneumatic Presser
Drying System Diesel Hot Air Generator
Drying Zone Lifting Pneumatic System Up & Down
Edge Guiding Web Aligner
Total Connected Load 45 HP
Dimension (L X W X H) In FEET 90 X 8 X 15

NOTE : The Information Of Paper Coating Machine/Coma Coating Machine Is Provided For The Purpose Of Guideline. The Given Information Is Change For Different Models


Unwinding Unit :

  • Set C.I. Body Plates All Side Shaped 45 Mm Thikness
  • Maximum Outer Reel Dia 600 Mm
  • One 50 Mm Mechanical Alloy Steel Bar Harden Shaft
  • Two Core Holders Horizontally Designed To Grip The Core
  • Shaft Mounted
  • Lock Nuts Provided To Tight The Bearings With The Body
  • Unwind Manual Clutch Type

Coating Station :

  • Side Plate  Mild Steel 35 Mm Thickness 2 Nos With Havy Linking Taibar
  • Gear Boxes And Highly Efficient Spiral Bevel Gears With Motor.
  • 1 Nos Coating Steel Rolls 215 Mm Dia
  • Three Coating Roll With Tow Mear Bar System.
  • All Aluminium Guide Roll Are Dynemically Balanced.
  • Gum Tray Will Be Made Of Stainless Steel.

DRYING ASSEMBLY :

  • The Drying Chamber Lenth 80 Feet
  • The Drying Chamber Opreting Open And Close Pneumatic System
  • Heating Load (100 – 200 Deg. C.) Adjustable As Per The Requirement.
  • The Temperature Can Be Set By Temperature Controller

WINDING UNIT :

    • Rewind System Twin Type Center Type
    • 2 Nos. C I Body Plates All Side Shaped
    • Maximum Outer Reel Dia 600 Mm
    • One 50 Mm Mechanical Alloy Steel Bar Harden Shaft
    • Rewind Tension Controlled By 5.00 Hp Ac Motor With Gear Box.
    • Two Core Holders Horizontally Designed To Grip The Core
    • Shaft Mounted On Bearings
    • Lock Nuts Provided To Tight The Bearings With The Body

Applications :